Skip to main content

Easy Fabric Christmas Trees

Every Christmas the decorating spreads to another room in my house. This year I am thinking about a small tree in the bedroom, just a little one with a few lights. While thinking about that tree I came up with some quick and easy trees for my craft room.
I started with fabric scraps in my favorite colors and a 10 inch $1.00 foam tree.
After ironing the fabrics, I started to wrap it around the tree, securing it with a pin.
Wrapping it until it was completely covered and then securing the back with pins.
Next I trimmed the bottom straight across.
Then I secured the bottom with a pin.
Now the pin was also used to balance the tree on a spool.
No Sewing or glueing needed as my scraps can be used for another project it I want to.

The perfect trees for my Craft Room
Simple and easy.
Festive and match my decor. 

And the fabric can be reused!
I love them..
Now just three more trees to decorate!


  1. These are fabu! Featuring them as part of my link party wrap up tomorrow.

  2. Brilliant idea! I love that they can easily be taken apart at the end of the season and the fabric used for your next project.

    Thanks so much for linking up!
    <3 Christina

  3. These are so cool. What a great project. May need to use this with my grandsons.

    ps I came over from The Answer is Chocolate.

  4. What a fun project and decoration, Janet!! I would love for you to link this post to my weekly Tasty Thursdays linky party going on right now. Thanks, Nichi


Post a Comment

Popular posts from this blog

Ipad Pillow Stand

I like to watch tutorials on my Ipad and although I have a cover that converts to a stand, it isn't always the best solution for viewing. So I decided to make one of my own inspired by these Iphone stands I found on Etsy. They are sold by dognamedbanjo and are really unique and lovely. So I thought I could make one similar to it and here is how i did it. First I started with a 1 yard of a fabric in my two favorite colors. Then I cut the following pieces 1 Pc 13" x 13" 1 pc 29 x 13" 2 Triangle pieces 13" x 13" x 13" Next I sewed the top square to the two triangles. This is will be the sides and the base. Next I took the large rectangular piece and sewed it to the bottom of the square. Now I don't have photos of the last few steps since once it start forming a pillow it is difficult to photograph, but the process is not that difficult. Next I sewed each side of the the rectangle to one side of the triangle on both sides. Then repeated the same proc…

Neck Tie Upcycled to Cuff

I found a large stash of Neck ties at an Estate Sale this past weekend and I had to buy them since I had the perfect idea for an upcycle project. They were mostly from a long since closed store here in Buffalo,NY and I felt the need to preserve them as well as the tags. I started by washing them on gentle and removing them immediately and laying flat to dry. They came out a little disfigured but nothing that a little ironing wouldn't fix. Next I took a seam ripper and opened up the back to take out the interfacing. I did this for two reasons, it was discolored and had a little odor and it would be easier to sew without this bulk.  I next cut the tie into a piece 10" long and hemmed the edge. Then I sewed two pieces of velcro to each side to make my cuff. The last step was to sew on a few antique buttons and beads and my cuff was done. Wow! Looking at this I can't believe how it turned out!.But wait... I made a few more! Love this one.. Antique Maple leave button and golden bead! …

T-shirt Upcycle to Cardigan

I have had this large long sleeved t-shirt for about a year. I paid $2.99 for it at the Salvation Army and appeared to be new. I had thought about embellishing it with a flower or two but could not come up with a original or cute idea so I decided to make a cardigan out of it. So lets get started and upcycle another piece of clothing! First I laid the shirt out and measured from under arm to under arm to find the exact center.
Once I found the center, I cut right up the middle. This step always makes me nervous ever since I was a child and tried to cut a collar on a coat to make it narrower. It was a disaster but I try not to think about it that much and just cut. Once it was cut, I decided to use the hem from another t-shirt that I had cut up for another project.  I cut two pieces of the hem of the t- shirt long enough to cover the edge of the cardigan and wrap around the top and bottom edge. I folded over the edge and pinned Then I pinned it to one side of the cardigan. Making sure to f…